shimga

Remove Background Noise From Audio Free (Online)

Tools ✍️ 📅 Published ⏱ 6 min read

How to Remove Background Noise From Audio for Free

Last updated: November 2026

To remove background noise from a recording for free, open the Shimga Noise Remover, load your audio or video file, press Remove noise, compare before and after, set the strength, and download the cleaned file. It is built for voice: podcasts, interviews, voice-overs, lectures and phone recordings with hiss, hum, fans, traffic or room noise behind them. The audio is processed in your browser and is not uploaded. How clean the result sounds depends on the recording; steady noise behind a clear voice cleans up well, while loud, changing noise that drowns the voice cannot be fully removed.

A dimly lit podcast studio with microphones and headphones on a table Photo: Reza Tavakoli on Pexels

Key facts

Remove background noise in 6 steps

  1. Open shimga.app/noise-remover.
  2. Load the recording. An audio file (MP3, WAV, M4A, OGG, FLAC) or a video file, up to 12 minutes. The sound is read straight from a video, so you don't need to extract it first.
  3. Press Remove noise. A progress bar fills while your device processes the file; Cancel stops it at once.
  4. Compare Before and After while it plays. Listen to pauses (is the noise gone?) and to words (is the voice still natural?).
  5. Set the strength. The slider blends the cleaned audio with the original, and moving it doesn't rerun the model. 100 percent is the cleanest; 70 to 85 percent brings back some natural room sound and hides artifacts. If the voice sounds hollow or "phasey," lower it.
  6. Download a WAV or an MP3. Then, if needed, run the audio enhancer for tone and loudness (set its noise reduction to zero, since the noise is already handled) or the volume booster for level.

Wear headphones while you judge the result. Laptop speakers hide both the noise and the artifacts.

What kind of noise do you have?

Different noise needs a different approach. Match yours to the table:

Noise Sounds like How well it cleans up Best tool
Hiss Steady "shhh" from cheap mics or high gain Very well Noise remover
Electrical hum Low "mmm" at 50 or 60 Hz plus harmonics Well Noise remover, or a hum/notch filter
Fans, AC, computer Steady whoosh Well Noise remover
Distant traffic, city Rumble with occasional swells Moderately Noise remover plus a low-cut filter
Café chatter, crowd Many voices Partly; it's voice behind voice Noise remover; results vary
Music in the background Melody and beat Better with separation Vocal remover, keep the voice
Room echo Hollow, distant voice Barely, with noise removal A de-reverb tool, or re-record closer to the mic
Clicks, bumps, plosives Short spikes Not by noise removal Cut or edit them out

"Background sound remover" and "background audio remover" searches often mean music behind a voice. If that's your problem, the separation approach in how to remove vocals from a song works better than a denoiser.

A busy pedestrian street with shops and people Photo: Vinicius A. Nascimento on Pexels

How noise removal works (in plain English)

Traditional noise reduction listens to a few seconds where only noise is present, builds a "fingerprint" of it across frequencies, and then turns down those frequencies whenever the signal is close to the noise level. It works well for steady noise and is what Audacity's Noise Reduction effect does.

Newer, model-based denoisers are trained on many examples of clean speech and noisy speech. Instead of needing a noise sample, they predict which parts of the sound are voice and keep those. They handle changing noise better, but they can also remove quiet breaths or soft word endings, and occasionally smear a voice they weren't trained on, such as singing or unusual accents and recording conditions. Shimga's noise remover uses RNNoise, an open model of this kind.

Either way, the tool has to guess. That's why a cleaner source always beats a stronger setting.

Prevent noise before you record

Five minutes of setup saves an hour of cleanup:

Our free online voice recorder guide has more recording tips.

A city street at night with cars and bright lights Photo: ALEKSANDR EVSTAFEV on Pexels

Free alternatives

Tool Type Strengths Trade-offs
Shimga Noise Remover Browser Quick, private, no install Long files take time on slow devices
Audacity Noise Reduction Free desktop Precise control with a noise profile Manual; best for steady noise
DaVinci Resolve (free version) Video editor Voice isolation and noise tools in a video timeline Large install; learning curve
NVIDIA Broadcast Free for NVIDIA RTX cards Real-time noise removal for calls and streams Needs specific hardware
Built-in call noise suppression (Zoom, Meet, Teams) Live Works during calls Doesn't fix recordings afterwards
Adobe Podcast Enhance Web (account needed, upload) One-click voice processing Files are uploaded; usage limits

FAQ

Is there a truly free background noise remover? Yes. Shimga's noise remover is free to use with no account, and Audacity is a free desktop alternative. Both process audio on your own device.

Can I remove noise without making my voice sound robotic? Usually, if you keep the strength moderate. The robotic or watery sound is an artifact of over-processing. Back off the setting until the voice sounds natural and accept a little leftover noise.

Can it remove background music from a video? A denoiser isn't designed for music. Extract the audio, use the vocal remover to keep only the voice, and put it back in your editor.

Will it fix echo in a big room? Only a little. Echo is the voice itself bouncing around, not separate noise. The audio enhancer can make the voice a little clearer with EQ, but it has no de-reverb, so the real fix is to record closer to the mic in a softer room.

Does it work for music recordings? It is built for speech and treats most instruments as noise, so it can dull or gate music. For songs, use a low strength and compare carefully, or use the vocal remover if you need to separate a voice from music.

Is my audio uploaded to a server? No. Shimga processes the file in your browser, so it stays on your device.

What should I do after removing noise? Even out and brighten the voice with the audio enhancer, then bring it to a good level with the volume booster. For podcasts, turn highlights into clips with a podcast audiogram.

All free tools are on the Shimga tools page.