Free Audio Enhancer Online for Podcasts and Voice
Free Audio Enhancer Online for Podcasts and Voice
Last updated: November 2026
To make a voice recording sound clearer and more professional for free, open the Shimga Audio Enhancer, load the file, pick a preset, press Enhance audio, compare before and after, and download. An enhancer combines several standard steps into one: reducing background noise, shaping the tone so speech is clear rather than boomy, evening out loud and quiet words, and setting a sensible final level. It's built for podcasts, voice-overs, interviews, lectures and video narration. The file is processed in your browser and is not uploaded, and results depend on the recording: it can polish a decent take but can't turn a distant, echoey phone recording into a studio one.
Photo: Alpha En on Pexels
Key facts
- An enhancer is a chain, not magic: noise reduction, EQ, compression and levelling, applied in a sensible order.
- Biggest audible improvements: removing low rumble, reducing boominess, evening out volume between sentences, and lifting clarity.
- Hardest problems: room echo, clipping (distortion), and voices recorded far from the mic.
- For podcasts, a common delivery target is about -16 LUFS (stereo) or -19 LUFS (mono).
- Compare at equal loudness. A louder version always sounds "better" at first; judge clarity, not volume.
- Privacy: processing happens on your device.
- Shimga's chain: RNNoise noise reduction, an EQ preset (Voice clarity, Podcast or Music warm), a compressor, then loudness matching to -14 or -16 LUFS with peaks held under -1 dBFS. Output is a 48 kHz, 16-bit WAV or a 192 kbps MP3, for files up to 12 minutes.
What an audio enhancer actually does
| Step | What it fixes | What overdoing it sounds like |
|---|---|---|
| Low-cut (high-pass) filter | Rumble from desks, traffic, handling noise below ~80 Hz | Thin, small voice |
| Noise reduction | Steady hiss, fan and room tone | Watery, "underwater" artifacts |
| EQ (tone shaping) | Boomy or muddy voices (often 200 to 400 Hz); dull voices lacking clarity (2 to 5 kHz) | Harsh, nasal or tinny sound |
| De-essing | Sharp "s" and "sh" sounds | Lisping |
| Compression | Big jumps between loud and quiet words | Flat, breathy, pumping sound |
| Levelling / loudness | A file that's too quiet or uneven between speakers | Noise and breaths become loud |
| Limiting | Peaks that would clip | Squashed, fatiguing sound |
Some tools also offer de-reverb (reducing room echo). It helps, but echo is the hardest thing to remove because it's the voice itself reflecting off walls. Shimga's enhancer has no de-essing or de-reverb step; it sticks to noise reduction, EQ, compression and loudness.
Enhance a voice recording in 6 steps
- Open shimga.app/audio-enhancer.
- Load your recording. An audio or video file, up to 12 minutes. Use the original, not a compressed copy you've already sent around.
- Pick a preset and loudness. Voice clarity for voice-overs, calls and lectures; Podcast for interviews and talk shows; Music warm for demos and mixes (with noise reduction at zero). Choose -16 LUFS for speech or -14 LUFS for music and social video.
- Press Enhance audio, then compare Before and After on headphones. Listen to a sentence, a pause, and a laugh or loud word. The After version is usually louder, so judge clarity, not volume.
- Back off if it sounds processed. A watery or metallic edge usually means too much noise reduction, so lower the noise slider. If the tone is wrong, try another preset.
- Download. Then trim the start and end with the audio trimmer, or cut mistakes with the audio cutter.
The enhancer already includes the same noise model as the noise remover. If you clean a file with the noise remover first, set the enhancer's noise slider to zero; doing heavy noise reduction twice usually makes voices sound worse.
Photo: Odin Reyna on Pexels
A simple free podcast audio workflow
This is a practical chain that costs nothing:
- Record each person as close to their mic as possible, in the softest room available. Use the free online voice recorder for solo episodes.
- Edit out false starts and long pauses.
- Clean steady noise. The enhancer's own noise step is often enough; use the noise remover on its own when you want to judge the noise reduction separately.
- Enhance with the audio enhancer for clarity and even levels, at -16 LUFS for speech.
- Check the level. The enhancer already matches loudness, so you only need the volume booster for files you didn't enhance (see how to boost volume safely).
- Export at 64 kbps mono or 96 to 128 kbps stereo MP3 with the audio compressor.
- Tag it with title, show name and cover art using the MP3 tag editor.
- Promote with short video clips; see how to make podcast videos and podcast visualizer templates.
Recording problems and what to try
| Problem | Try in the enhancer | Better long-term fix |
|---|---|---|
| Boomy, muddy voice | Low-cut and less low-mid | Move slightly back from the mic; avoid corners |
| Thin, harsh voice | Gentler settings, less high boost | Speak a little closer; different mic angle |
| One guest much quieter | Compression and levelling | Separate tracks per person; match mic distance |
| Hollow, echoey room | Light settings (there is no de-reverb step) | Soft furnishings, record closer |
| Hiss | Noise reduction | Lower gain, closer mic, better cable |
| Distortion on loud words | Little can be done | Lower input gain and re-record |
| Remote guest on a call | Enhancement helps a little | Ask the guest to record locally and send the file |
Photo: Yan Krukau on Pexels
Alternatives and when to use them
- Audacity (free): do each step manually with Filter Curve EQ, Noise Reduction, Compressor and Loudness Normalization. More control, more time.
- DaVinci Resolve (free version): its Fairlight audio page has EQ, dynamics and voice tools, handy if you're already editing video there.
- Adobe Podcast Enhance: a well-known one-click web tool that uploads your audio to Adobe's servers and requires an account; free use has limits.
- A DAW (Reaper, GarageBand, others): for music or complex multi-track podcasts with plugins.
A browser enhancer is the right call when you want a fast, private improvement without learning audio engineering.
FAQ
Can an audio enhancer make my phone recording sound like a studio? It can make it noticeably cleaner and more even, but it can't add detail that was never captured. Distance and room echo are the limits. Results depend on the recording.
Is the audio enhancer free? Yes, it's free to use with no account, and processing happens in your browser, so there's no upload.
Should I enhance before or after editing? Edit out mistakes first so you're judging the material you'll keep, then enhance the whole episode in one pass so it sounds consistent.
Does it work on singing or music? Yes, with the Music warm preset and noise reduction at zero; it adds a gentle tone tilt and matches loudness. It is not a mastering engine and won't fix a muddy mix, and the noise step is tuned for speech, so on music it can treat instruments as noise.
What loudness should a podcast be? About -16 LUFS for stereo or -19 LUFS for mono is a widely used target, with peaks under -1 dB.
What's the difference between the enhancer and the noise remover? The noise remover only targets background noise. The enhancer also shapes tone and evens out levels. If you use the noise remover first, set the enhancer's noise slider to zero. The background noise guide explains which noises can be fixed.
Is my recording uploaded? No. Your file stays on your device.
Find more free audio tools on the Shimga tools page.